Cooler Master V6GT Cooler

Tagged: Air Cooling, ChillTec Thermo Electric CPU Cooler, Press Releases
Source: Cooler Master - Read the full article
Posted: 4 years 22 weeks ago

Looking for a CPU cooler that both looks great and still outperforms the competition? Your wait is over, as the Cooler Master V6GT combines a new thinking in CPU cooler design, yet doesn’t compromise on cooling performance. It also packs a range of great features as standard, such as the use of a Double-V heatpipe design, twin 120mm DynaLoopTM PWM fans, a built in LED strip on the top and of course support for multiple CPU sockets.

 

No performance compromises

Cooler Master has designed the V6GT as a no compromise air cooler and has come up with several new key improvements that makes this one of the best CPU air coolers on the market.

Cooler Master put V6GT coolers through torture tests by using them to cool a pair Xeon X5670 processors on EVGA’s Classified SR-2 motherboard and a i5 655K processor.

The Xeon X5670 processors were overclocked to 4GHz, yet the V6GTs kept both CPU’s at sub 70 degrees C, and the i5 655K was overclocked to a mssive 5.269GHz under 66 degrees C, even during extended periods of extreme benchmarking at these high clock speeds.

     

 

Features that matter

By adding 55 densely stacked fins asymmetrically with a five degree tilt the V6GT has lower airflow resistance than your average heatpipe based cooler. This means that more air can be pushed through by the twin 120mm fans which results in vastly improved heat dissipation. The twin V shaped heatpipe layout maximizes the contact area between the 6mm heatpipes and the heatsinks, as well as putting all of the heatpipes in a direct path of the airflow.  

 

DynaLoop PWM fans

The fans used on the V6GT uses a new type of bearings known as DynaLoop which extends the life of the bearings to 40,000hrs. The new wave shaped fan blades increases the airflow while maintaining an even air pressure which leads to less fan noise. Both fans also features PWM fan control which further helps reduce the noise from the fans when the CPU is idle or under a low load. The fans are also easy to install and remove thanks to a new tool-free snap-on fan cover. The fans operate at between 800 and 2200rpm and produce an airflow of 34 to 94 CFM per fan, yet the noise level is only a mere 15 to 38dBA.  

 

Made to look the business

The V6GT manages to combine great looks with great performance. It builds on Cooler Masters famous V-series of coolers. The top of the V6GT has been equipped with a cover that houses an LED light strip and you can set the colour to blue, red or purple by simply adjusting the “engine oil cap” dial on the top of the cooler.

 

Universal mounting kit

The V6GT comes with a mounting kit that allows you to install it on all current CPU platforms. It’s supplied with all the mounting brackets, back plates and screws that you’d need, as well as a syringe of Cooler Master’s thermal paste. This means that there’s no need to buy any additional accessories to install the V6GT unlike some competitive solutions.

 

Specifications

CPU Socket

Intel Socket LGA1366 / 1156 / 775
AMD Socket AM3/AM2+/AM2

Dimension

131 x 120 x 165 mm (5.2 x 4.7 x 6.5 inch)

Heatsink Material

Copper base / 55 x 0.3mm Aluminum fins / 6 heatpipes

Heatpipe Dimension

φ 6mm

Fan Dimension

120 x 120 x 25 mm (4.7 x 4.7 x 1 inch)

Fan Speed

800 – 2200 RPM (PWM)

Fan Airflow

34.02 – 93.74 CFM

Fan Air Pressure

0.43 - 3.30 mm H2O

Fan Life Expectancy

40,000hrs / 25

Bearing Type

DynaLoop™ Bearing

Connector

4-pins

Noise Level (dB-A)

15– 38 dBA

Rated Voltage

12 VDC

Start Voltage

6 VDC

Operating Voltage

6 – 13.2 VDC

Rated Current

0.45A (0.7A Max.)

Input Power

5.4W (8.4W Max.)

 

About Cooler Master

Cooler Master was founded in 1992 to provide the world’s best thermal solutions. Since its establishment, the company continues to invest in product development to provide leading-edge innovations. Cooler Master’s line-up includes heat sinks, fans, chassis, power supplies and computing accessories. Headquartered in Taiwan with branch offices located across Europe, America and APAC, Cooler Master offers unsurpassed service to our customers. For more information on Cooler Master, please visit www.coolermaster.com.

 

Comments

Anonymous

looks promising, will have to wait till the reviews come out

Andreas Hofer
Andreas Hofer's picture
Offline
Joined: 10/31/2009
Posts: 121

38dBA is far from being silent and/or acceptable (Noctua's NH-D14 is rated at 19.8dB). If you sometimes do work late at night like me (because of Europe-Canada business), you appreciate less noise.

If you are really looking for more cooling potential then take a look at Coolit's new Eco A.L.C. lineup. They now offer a dual radiator version that gives you even more cooling performance (hoping for a review!).

BXDfreedom
BXDfreedom's picture
Offline
Joined: 04/06/2010
Posts: 8

I'm waiting for this one,,, but does this do better than my old V8?...hmmm

Anonymous

WOW this thing is delayed like sh*t.

massau
Offline
Joined: 04/05/2010
Posts: 236

is it better than the noctua fan that broke the 5ghz limit on air

Anonymous

When is this going to be available ??