kds rad-5 monitor settings or optimal settings

2 replies [Last post]
rmx77
Offline
Joined: 04/10/2011
Posts: 2

i happen to have gotten a kds rad-5 monitor and i wonder what the default settings are or what the best settings for the monitor are if at all. i have seen the youtube video on the monitor and wondered what the settings were.

3dGameMan
3dGameMan's picture
Offline
Joined: 12/31/2000
Posts: 5081

Default setting should be fine for most. Usually each display has it color weakness, for example, maybe there's to much Red. In that case, just back the red off a bit. Also, I usually lower the brightness so it doesn't hurt your eyes.

You can buy calibration software and hardware, but this is a bit extreme for most.

Rodney Reynolds,
Register: http://www.3dgameman.com/user/register

rmx77
Offline
Joined: 04/10/2011
Posts: 2

that sounds like a plan. its always a good idea to get the calibration software cause for me i like to over do stuff not to a point it will ever fail but i like to over do stuff. what would you recomend for a hardware calibration program