The SIZE variable doesn't seem to work right in the Signature area

3 replies [Last post]
Mon, 03/08/2010 - 12:49
SubZero
SubZero's picture
Offline
Joined: 01/15/2007
Posts: 112

If I try a " [ SIZE = 2 ] (without the spaces) in the sig, it makes it so tiny it's unreadable. I'm not sure if that should work that way or not, cause before, I had it at 1 and it looked fine, just small is all. Same thing if I try the 2 instead of 1

Thought I'd let you know.

Thanks

Top
Mon, 03/08/2010 - 13:08
#1
Tiv
Tiv's picture
Offline
Joined: 08/12/2009
Posts: 3584

Check out the new Editor. Hit the Size drop down. I think we are using a more modern system now and anything before was just an adjustment of automation. 1 and 2 would have been set to font sizes like 8 and 12 ect..

I sleep fine at night knowing we are banning people who deserve it.  Tivon
Don't test my skills, I was trained by myself!™ Check out my Gaming Videos!

Top
Mon, 03/08/2010 - 13:11
#2
Tiv
Tiv's picture
Offline
Joined: 08/12/2009
Posts: 3584

CyberPowerPC Custom with CoolerMaster Elite 310 Blue case, a 750 Watt Antec True Power Blue PSU, Gigabyte MA770T-UD3P MB, 1 Blue Cathode Light with On / Off Switch, 3 Blue 120mm fans, stock CPU cooling for an AMD Phenom II X4 965 BE, 4 Gig DDR3 at 1800 Mhz, EVGA GTX 295, 1.44 Meg Floppy Drive, 2 IDE and 1 SATA hard drive, 1 Optiarc AD7240S SATA Optical Drive, Realtek 888 MB Audio, 30" Samsung 305T 2560x1600 capable LCD all plugged into an APC RS 1200va UPS that has BOTH Boost AND Trim AVR.

 

This is size 10!

Top
Fri, 03/12/2010 - 10:24
#3
SubZero
SubZero's picture
Offline
Joined: 01/15/2007
Posts: 112

Got it. Size 10 does it pretty well.

Thanks

Top